infinix hot (x551) 16+1 factory firmware free download

infinix x551 16+1 factory firmware free download
infinix x551

infinix hot note (x551) it comes with 16Gb of ROM storage memory and 1Gb of ram Random access memory Kitkat based on android powered by MediaTek, Octa-core 1.4GHz chipset, 8 megapixels back camera, front camera 5 megapixels, supported face unlock, it does not support fingerprint, Mtn free browsing for a week supported and much more.

Download infinix hot (x551) factory firmware for repairing like removing stubborn FRP lock and fixing virus and bugs, hag on the logo also it can help you repair dead after flashing with the wrong firmware and much more.

How to write infinix hot (x551) factory firmware to un break it ?

Firstly you must have all this material or i should said flashing tools like,

Computer or laptop

Mediatek usb driver

spflashtools v v5.1924 Recommended

infinix hot (x551) full firmware zip file

After downloaded or getting all this tools then you will extract the firmware zip file with Winrar or 7zip then make sure you have checked your rom and ram size before writing any infinix stock firmware to prevent breaking after flash with stock firmware after doing all these things then download MediaTek USB driver zip file extract it with Winrar then installed it on your computer after doing this also download a sp flash tools v5.1924 then extract it to specific folder then locate the folder run the setup after doing this pick up your infinix hot switch it off then find a good micro USB external thin load a scatter file on sp flash tools v5.1924 then press start button after that connect it to pc port then plug it on your phone that it all wait until is show green icon it means the stock firmware has been finished then unplug it from your computer press on button wait until it has shown start wizard that’s all.

Cautions don’t interrupt while the flashing file is writing be patient okūüėĀ

infinix hot (x551) flash tools
spflashtools

Spflashtools is very easy to use I will show you how to use it on a computer just download the full zip file of sp flash tools then extracted to a specific folder then run the program wait a little moment it will open then load any scatter file it has a lot of feature after loading you stock firmware scatter file you will see option like this to choose: download all + format and firmware upgrading also with download only these feature optional of sp flash tools.

Note that: before you write this stock firmware make sure have taken a backup of the old firmware before writing a new one to prevent loss of original firmware and also if possible take a back up of your data file like music, video, contacts, and document and much more before writing this stock firmware.

This infinix hot (x551) factory firmware is already tested by tech buzz team.

infinix hot (x551) factory firmware download information
size 990 Mb
Password null
id: X551-G808-A1-KK-20150123
hosted on a mega cloud
DOWNLOAD HERE
Download information

USE THIS FIRMWARE AT OWER RISK .

I f you don’t understand my tutorial please feel free to write a comment so I will guide you on how to write a infinix hot without breaking your device.

ENJOY ūüôĆūüéČ

Tecno pop2 (bp1) factory firmware free Download

Tecno pop 2 power (bp1) it has come with colors champagne Gold, midnight black, city blue, screen inch 55″ Touchscreen Rom 16 Gb Ram 1Gb Front camera 5 megapixels Rear with flash, face unlocking, fingerprint sensor, android chipset Hious based on android 8.1 (Go edition ) frame Height:149.76 mm width 72.8mm, 1.3 GHz Quad-core, Battery 2400 Ah (typ) network supported 3G-4G, Connectivity Bluetooth and wifi in the box comes with phone 1 charger cable, charger head.

Tecno pop 2 power (bp1) stock firmware for repairing like removing google account verification (FRP) and fixing a lot of virus and bugs today am gonna show you how to use this Tecno (bp1) stock firmware with a one powerful flashing software and is very easy to use anyone can use it without breaking his Tecno( bp1) also with MediaTek USB driver for connectivity just follow my instructions step by step.

Materials needed for writing tecno pop 2 (Bp1) stock firmware:

Laptop or computer

supported windows 10/8/7

Mediatek usb driver for pc

Micro Usb data cable for conecctivity

Aftersale firmware downloader Any version

The computer you must have it because it’s the tools can help you write a Tecno pop 2 power (bp1) stock firmware also installed an mtk USB driver and aftersale software downloader.

Mediatek usb driver you must installed it can help the phone can detected by a computer how to installed it” download the mtk usb driver zip file make sure is full then extract it with winrar or 7zip to a specific folder then run a program select install anyway properly check the picture below after installed it

mtk usb driver

How to use aftersale software downloader ?

Firstly make sure you have downloaded aftersale software zip file extract it with Winrar or 7zip software to a specific folder the locate the exe run it wait until it pops up select settings icon load the stock firmware scatter file then switch off your tecno find a micro usb then plug it then click start wait until is done

if yet you don’t understand my tutorial feel free write a comment

  1. Tecno pop 2 power (Bp1) stock firmware download information:
Size 1.8 Gb
Tested by techbuzz team
1 file is 663 mb
Price freely
link on the mega cloud
Password nulllink on the mega cloud
DOWNLOAD DETAILS

ID B1-F8018D-GO-181114V70Download
ID B1S-F8018F-GO-KESF-190320V39Download
ID B1-F8018BC-GO-181117V124Download
DOWNLOAD DETAILS

Note that : before you start using this firmware ensure you have taking the back up of all your personal data files like music ,video ,document etc.

Tecno pop2 power file is tested by the techuzz team its woking 100% no risk.

Caution: use this this stock firmware at owner risk.

miracle box software version 2.82 cracked 2020


Miracle box software cracked version 2.82 for repairing mobile device like smartphones and feature mobile devices you can fix any issues with miracle box software the issues like password removing virus and bugs also with google account verification lock (FRP) you use miracle box software to write any smartphone stock firmware like MediaTek firmware and speedrun PAC file with cool-sand firmware with Qualcomm stock firmware is very easy to use miracle box software follow my instructions step by step.

Materials needed for using cracked miracle box software v 2.82.

Computer or laptop

USB drivers for all devices

miracle box software 

Miracle box software cracked is very easy to use also it has many features not like older versions this one it has service optional like MediaTek read password with speedrun password removing without loss of personal data file also it has a feature of repairing imel numbers without a break you smartphones also you can write a Qualcomm stock firmware without error.

Miracle box software cracked versions chipset supported.

Mediatek chipset

speedrun chipset

coolsand chipset

Qualcomm chipset

CDMA/LG chipset

mister/w chipset

Samsung chipset

and much more…….

How to use miracle box software to remove google account verification lock (FRP)?

firstly ensure you have a pc then download an mtk USB driver installed it on your computer then download the miracle box software is cracked no need of any box then extract the zip file to a specific folder then ren the setup wait until it open then select service also select mtk optional then navigate select custom setting load the da file then go back to service option switch off your device then find a good micro USB then connect it then select format wait until two option popup un-tick the format leaves frp click, ok wait until the process is done.

How to write a stock firmware with miracle box software faster?
firstly ensure your phone is about to write a stock firmware it must have battery charge like 50/100 to prevent error while is processing then download any smartphone stock firmware then extract it with Winrar or 7zip program then run the miracle box software select mtk also select write load a stock firmware scatter file then connect your phone via micro USB then click write wait until the process is done don’t interrupt the process until it has done.

Miracle box software downloads the information below.

miracle box size 160 Mb

MediaTek USB driver size 1 Mb

price freely

password null

tested working 100%

link on the mega cloud

Enjoy 

if you don’t understand just write a comment below let me know………………..

Tecno f3 da file for removing FRP and writing stock firmware.

tecno f1 da file,tecno f3 flash file,tecno f3,tecno f3 da file download,tecno f2 da file,tecno k8 da file,tecno f1 frp,tecno da boot file,tecno f3 da cm2,tecno b1 flash file,tecno f2 frp

Tecno f3 it comes with 16 GB of ROMs and 1 GB ram colors Black, Golden, city blue, camera beauty 16 megapixels front back camera 5 megapixels security face unlocker and fingerprint supported battery capacity 24000 Android chipset MediaTek Mtp 7580 network support 4g,3g.2g, wifi and much more.

Tecno f3 da file¬†custom boot file (da file) for removing google account lock (FRP) you use da file to write firmware also you can fix any issues on your device like removing password privacy lock anti-theft you can also fix breaking using it” today am gonna show you how to use da file on miracle box or eft dongle cracked one follow my instructions step by step.

Tecno f3 da file information;

chipset MediaTek

phone supported Tecno f3

da file for removing FRP/ firmware

Tecno f3¬†da file is working faster on any flashing tools like mtk cm2 dongle cracked and not cracked you can download it easily also without password and also without paying anything it’s freely.

Materials needed for removing FRP?

Computer or laptop

Mediatek USB driver

Flashing tools needed for removing FRP?

Miracle box v2.82 crack and none

Mtk Cm2 dongle

Eft dongle cracked

I have recommended using eft dongle is very fast also no need no wait or freezing just download it after downloaded the eft dongle zip file unzip it with Winrar or 7zip to a specific folder locate the folder open it run the setup ensure it installed properly on your computer ” then select android mtk to load the da file thick on FRP reset switch off your phone connect it via USB then click start to wait until done.

Note that: before you process using this Tecno f3 da file ensure you take a backup of all your personals data files like phone contacts, music file, videos file, messages, document, and much more to prevent the loss, Ensure you have downloaded exact da file for your device to avoid breaking your device.

Tecno f3 da file download information.

size 1 MB or less 

hosted on dropbox 

tested by tech buzz team 

working rate 100 %

virus no 

link one click

price free 
                                                             

                                                                    

enjoy 

sharing is caring 

keep visiting for more ….

Tecno Camon cm/ca6 factory firmware free Download

image

Tecno Camon cm MediaTek chipset it comes 16GB ROM and 2GB Ram camera front 13 megapixels back camera 13 megapixels screen inch” ¬†18:9 Hios based on android 7.0 Fingerprint quick snap 1.3 GHz quad-core processor Battery capacity ¬†3000 mAh ¬†HD7+ ¬†support GPRS 4g LTE.

Tecno Camon cm factory firmware stock ROM with it you can repair your devices like hang on logo or google account activation lock (frp) you can fix a lot of issues also with the virus and some bugs”actually the firmware is already tested it’s working fine you can write it on your Tecno Camon cm ca6 with any mtk support dongle or box today I will show you how to write a Tecno Camon cm ca6 firmware without error follow my instructions.

You must take a backup of all your personal data files before writing firmware. 

Contacts

Videos

Music

message

This above backup is very important because it will prevent loss of data files if you have forgotten to backup your data there no way to restore that’s why we recommended you to take all personal data files.

You must take a back up of all your Tecno Camon cm ca6 NVRAM and firmware.

NVRAM

Firmware if possible full

Flashing tool and dongle or box and a USB driver  that is supporting writing Tecno cm ca6 is :

you must have a computer or laptop

Installed MediaTek USB driver on your pc

Download a MediaTek software updating here

For unzip the file WinRAR program

How to write a Tecno Camon cm ca6 stock firmware?
first of all, make sure you have downloaded and installed the mtk USB driver on your computer then download the mtk software updater then download the full Tecno Camon cm ca6 firmware once you have done then run the software updater load the firmware connect micro USB on your computer switch off your phone after done connect it to your phone wait until the process completes.

If you don’t understand the instructions wait for the video below.

Tecno Camon cm ca6 stock firmware information below.

id CA6-H3721G-N-171211V55

Password  www.gsmclass.com.ng

Size 1.7 GB

Price is freely no paying

Tested by tech buzz

hosted on the mega cloud

one click

Note: this firmware is already tested by the Techbuzzt’s working 100% ” use it at owner risk.¬†

ENJOY 

MTN 75 DATA MB FOR JUST 20 NAIRA 2020

hi’ welcome friends today am gonna show you how to subscribe mtn 75 data MB at the rate of 20 nairas but it’s for eligible user only is for ¬†selected mtn sim card you buy it at any time you want no limit also you can browse download watch video the data validation is for a week you can buy it multiple subscribe time no limit.

To get started 

Make sure you have N20 or more to buy a 75 data MB

then subscribe  dial *131*10#

you will get prompt to subscribe to the 75MB for N20

reply with 1 to auto-renew reply with 2

See the example below.

if your eligible you get a message about you have successfully subscribed then start browsing and downloading a large file the data Mb has powered all devices it works perfectly.

To check data balance dial *131*4# 

How to get 1.5 mtn data Mb for N400 naira 

it’s very simple’ if you are eligible for 75 data Mb for N20 you have to subscribe 20 times” which you will give you a total of 1.5GB of data Mb, while you spend N400 naira .this is better than the mtn normal data plan of 1000 at 1.5GB.

If you’re ¬†eligible” it’s really good ¬†value to have”if you’re aren’t eligible with your old sim card and you can give to a new mtn sim card trials’

please let us know if you are eligible for this amazing data offer via the comment section below 

                                                           join our telegram channel 

SHARING IS CARING. 

ENJOY.

Tecno povour 3 plus lb8 factory firmware free Download

image

Tecno Povour 3 plus (lb8) it comes with 64GB of ROM and 4GB Ram android version 9 Mtp 6762 octa-core Ai triple camera battery capacity 6000 mAh up to 5-day touch screen Network band 4G G-sensor fingerprint etc.

Tecno pouvoir 3 plus lb8 factory firmware stock ROM with it you can repair your devices like hang on logo or google account activation lock (frp) you can fix a lot of issues also with the virus and some bugs”actually the firmware is already tested it’s working fine you can write it on your Tecno pouvoir 3 plus lb8¬†with any mtk support dongle or box today I will show you how to write a Tecno pouvoir 3 plus lb8¬†firmware without error follow my instructions.

You must take a backup of all your personal data files before writing firmware. 

Contacts

Videos

Music

message

This above backup is very important because it will prevent loss of data files if you have forgotten to backup your data there no way to restore that’s why we recommended you to take all personal data files.

You must take a back up of all your Tecno pouvoir 3 plus lb8 NVRAM and firmware.

NVRAM

Firmware if possible full

Flashing tool and dongle or box and a USB driver  that is supporting writing Tecno pouvoir 3 plus lb8 are:

you must have a computer or laptop

Installed MediaTek USB driver on your pc

Download a MediaTek software updating here 

For unzip the file WinRAR program

How to write a Tecno pouvoir 3 plus lb8 stock firmware?
first of all, make sure you have downloaded and installed the mtk USB driver on your computer then download the mtk software updater then download the full Tecno pouvoir 3 plus lb8 firmware once you have done then run the software updater load the firmware connect micro USB on your computer switch off your phone after done connect it to your phone wait until the process completes.

If you don’t understand the instructions wait for the video below.

Tecno pouvoir 3 plus lb8 stock firmware information below.

Build number id  LB8-h6110ABC-P-190628V167

Password  www.gsmclass.com.ng

Size 1.8 GB

Price is freely no paying

Tested by Techbuzz

hosted on the mega cloud

Download link coming soon

Note: this firmware is already tested by the tech buzz working 100% ” use it at owner risk.¬†

WRITE A COMMENT BELOW. 

SHARING IS CARING.

ENJOY. 

How to get 650 data mb on 9mobile at the rate of N200 only

image

How to subscribe 9mobile 650 data Mb at the rate N200 only the 650 data Mb is powering all your devices like smartphone laptop and another device you can download a large file also watch movies like youtube Netflix and you can chat with a data Mb the 650 data Mb is valid for a one day ¬†last longer if you’re lucky you can subscribe for multiple time x2 or x3 a day.

To Get started 

if you have 9mobile sim card you can enjoy this affordable data bundle ensure you have N200 naira

on you’re 9mobile sim card then dial *229*3*2#¬†

wait until ¬†you receive a message like this ” you successfully subscribe 650 Data Mb

to check data Mb balance dial *228#

then start browsing downloading watching and much more.

Data Mb valid one day 

How 9mobile data Mb it work?
9mobile Nigerian network company is on all over the nation anyone knows 9mobile network is very strong and faster we use 9mobile data bundle plan to browse and download our favorite files.

SHARE THIS POST TO OTHERS. 

ENJOY
                                                              

Glo amebo free recharge amount 100 to 1000 today

Glo Nigeria launches a free multiple any amount you have recharge like if you recharge 100 you will get a bonus of N500 nairas the bonus you can talk long also you can call mtn numbers with Airtel number with a bonus the bonus is valid for 14 days you can browse with a bonus also you can share to a friends and family” the one thing is about Glo network is lack of strong a lot of time you will see no service also no network but” if you have good Glo network in your area you can enjoy this bonus.

image

The above picture is the amount of recharge and bonus also with validating days for a Glo user in Nigeria just recharge 100 and get 500 recharge 200 get 1000 recharge 500 get 2500 Etc.

To Get Started

load Glo air time with this digit *555* pin #

after done with recharging your account then check your balance like this 

just-dial #124#

I know you will get this bonus if you’re a Glo user this bonus is long and lasting you can share it with your friends and family.

Tested by the Techbuzz team it’s working is only for Glo Nigeria users. if not work for you write a comment below.

Support by sharing this post with others.

Enjoy

Tecno la7 custom boot da file & auth file free download

image

Tecno pouvoir la7 comes with 16GB of ROM and 2GB ram screen HD 7.2 touchscreen CPU 1.3 GHz quad-core based on aroid version 9 battery capacity 5000mah long standby up to 4days (normal use ) front camera 8 megapixels back camera 13 megapixels network band supported 4G supported.

Download Tecno la7 custom boot file (da file) for removing google account lock (FRP) you use da file to write firmware also you can fix any issues on your device like removing password privacy lock anti-theft you can also fix breaking using it” today am gonna show you how to use da file on miracle box or eft dongle cracked one follow my instruction step by step.

Tecno la7 da file information;

chipset MediaTek

phone supported Tecno la7

da file for removing FRP/ firmware

Tecno la7 da file is working faster on any flashing tools like mtk cm2 dongle cracked and not cracked you can download it easily also without password and also without paying anything it’s freely.

Materials needed for removing FRP?

Computer or laptop

Mediatek USB driver

Flashing tools needed for removing FRP?

Miracle box v2.82 crack and none

Mtk Cm2 dongle

Eft dongle cracked

I have recommended you an eft dongle is very fast also no need no wait or freezing just download it after downloaded the eft dongle zip file unzip it with Winrar or 7zip to a specific folder locate the folder open it run the setup ensure it installed properly on your computer ” then select android mtk to load the da file thick on FRP reset switch off your phone connect it via USB then click start to wait until done.

image

Download information:

Size 1mb

Password =www.Techbuzzcom.ng

Price free

Tested by Techbuzz

link on dropbox

one click to download

join our telegram channel
                                    
                                          The Tecno da file is already tested by the Techbuzz team.

ENJOY